---
title: "How does Mergify compare?"
description: "Honest 5-way comparison of merge queue platforms in 2026: GitHub Merge Queue, Graphite, Trunk, Aviator, and Mergify. Feature matrix, decision guide, and FAQs."
url: https://mergify.com/compare-mergify
---

# How does Mergify compare?

An honest, side-by-side look at the five merge queue platforms teams shortlist most often: GitHub's native queue, Graphite, Trunk, Aviator, and Mergify. We wrote this because the comparison content out there is either a competitor's marketing page or a year out of date.

[Start a free 14-day trial](https://dashboard.mergify.com/)[Talk to our team](https://mergify.com/discovery)

## The short version

[

### GitHub Merge Queue

Free, ships with GitHub. The right starting point for small teams.

Best for: Teams under 10 engineers, single repo, simple CI.

Where it falls short: No batching, no priorities, no monorepo scoping, no flaky test handling.

Full comparison →

](https://mergify.com/compare/github-merge-queue)[

### Graphite

Stacked diffs and AI code review. Merge queue is included but narrower.

Best for: Teams that want stacked PR workflows as the headline feature.

Where it falls short: No CI observability, no flaky test detection at the queue layer, no merge governance.

Full comparison →

](https://mergify.com/compare/graphite)[

### Trunk

Flaky test detection and test analytics at the CI layer.

Best for: Teams whose primary pain is test stability and CI test visibility.

Where it falls short: Narrow on merge governance and CI-wide observability outside test runs.

Full comparison →

](https://mergify.com/compare/trunk)[

### Aviator

Capable merge queue at a lower starting price.

Best for: Teams that only need queueing and want a low entry point.

Where it falls short: Sells the queue alone. CI observability and merge governance are separate products.

Full comparison →

](https://mergify.com/compare/aviator)

### Mergify

Merge queue with batching plus bisect-on-failure, CI Insights (job health, auto-retry), Test Engine (flaky detection, quarantine, PR-level prevention), plus scheduled freezes and cross-repo PR dependencies in the queue. One plan, no separate products.

Best for: Teams that have outgrown GitHub's queue, run monorepos, care about CI cost, or operate in regulated environments where tested SHA must equal merged SHA.

Where it falls short: GitHub-only on the merge side. We ingest CI results from GitLab CI and most other CI providers, but the merge queue needs GitHub. Workflow Automation is being deprecated long-term, so do not buy it primarily for that.

## Feature matrix

Side-by-side, no marketing fluff. Cells are check, dash, or short text where there is meaningful nuance.

| Feature | 
GitHub MQ | 

Graphite | 

Trunk | 

Aviator | 

Mergify |
| --- | --- | --- | --- | --- | --- |
| CI batching (test multiple PRs together) | – | – | ✓ | ✓ | ✓ |
| Bisect on batch failure | – | – | ✓ | ✓ | ✓ |
| Speculative checks | ✓ | – | ✓ | ✓ | ✓ |
| Multi-level priorities | Jump to front | – | Basic | Basic | Multiple levels |
| Two-step CI (light pre-queue, heavy in-queue) | – | – | ✓ | ✓ | ✓ |
| Monorepo / scope-aware batching | – | – | ✓ | ✓ | ✓ |
| Flaky test detection | – | – | Separate product | – | ✓ |
| Flaky test quarantine | – | – | Separate product | – | ✓ |
| PR-level flaky test prevention | – | – | – | – | ✓ |
| Auto-retry on CI failure | – | – | Anti-flake only | ✓ | Configurable rules |
| Custom merge conditions (rule engine) | Status checks only | – | Status checks only | Basic | Full YAML |
| Queue pause | – | – | ✓ | API only | UI + API |
| Scheduled merge freezes | – | – | – | – | ✓ |
| PR dependencies (Depends-On) | – | – | – | – | ✓ |
| Stacked PRs | – | Core product | – | Separate product | Free, open source |
| Merged SHA equals tested SHA | – | ✓ | ✓ | ✓ | ✓ |
| CI Insights (job health, auto-retry analytics) | – | – | – | Basic analytics | Full product |

Used by the platform teams that ship fast and keep CI green

"Two-step CI completely transformed how we handle long hardware tests. Instead of burning hours on repeated runs, we validate once and merge with confidence."

Rushin Shah, Sr. Manager DevInfra · Cerebras

"The merge queue is a huge value from Mergify: it keeps our main stable and allows us to merge quickly with confidence."

Minh Tran, Platform Engineer · Apex Fintech Solutions

"You get the benefits of Mergify immediately. There is no competitor doing stuff like this."

Florian Berchtold, Software Engineer · Luminar

"The merge queue is a time-saver! Contributors no longer have to carry the mental load of monitoring their PRs!"

Johan Lorenzo, Staff Release Engineer · Mozilla

"We transitioned from manual chaos to over 20 safe deploys per day. Mergify is becoming a critical part of our delivery function."

Chris Irving, Engineering Manager · Jane

"Our merge queue is like a safety net. Every PR that lands has been tested, approved, and verified under the exact same conditions."

Fabien Marty, Senior Staff Software Engineer · Botify

"With dozens of engineers and long-running CI jobs, Mergify turned what used to be a daily bottleneck into a background process. Our teams focus on hardware, not merge logistics."

Ben Holtzman, Senior Design Enablement Engineer · AheadComputing

"Before Mergify, we spent too much time manually coordinating merges. Now everything flows automatically."

Nicolas Beaussart-Hatchuel, Senior Staff Software Engineer · PayFit

"Mergify was the best fit. It saved a couple of hours per engineer per month and resolved our bottleneck with the merge queue."

Tomas Nekolny, Engineering Manager · Productboard

"The support on Slack is really good, reactive and transparent. We have other partners where problems feel less transparent. With Mergify, it's fluid."

Clément Danjou, VP Blockchain · Zama

## Which one should you pick?

Match the tool to your actual pain. The wrong answer for your team is paying for features you do not need, or skipping features you do.

### Pick GitHub MQ if

-   ✓ You have fewer than 10 engineers contributing
-   ✓ You ship under 20 PRs per day on the queued repo
-   ✓ You do not yet have a flaky test problem
-   ✓ Your CI runs under 15 minutes per PR

### Pick a paid platform if

-   ✓ 20+ engineers ship daily, queue throughput matters
-   ✓ Your monorepo needs scope-aware test routing
-   ✓ Flaky tests are eating engineering time
-   ✓ You need merge freezes, PR dependencies, or scheduling
-   ✓ Audit posture requires tested SHA to equal merged SHA

If your team is small and you just need basic queueing, GitHub Merge Queue is free and ships with GitHub. Among the paid options: if your pain is stacked PRs, look at Graphite. If you want the cheapest queue and only the queue, Aviator. If you want one platform that covers the queue, CI observability, and merge governance under one plan, Mergify.

The teams we see consolidate fastest are the ones running two or three of these side by side and paying for overlap. That is the case Mergify is built to win.

> Early on, as the team, tests, and CI complexity grew, it was quite clear that we needed an automated tool to resolve bottlenecks. Our team loves the way Mergify solved our growing pains.

Tomasz Biernacki

Quality Assurance Engineer at Pitch

## Related comparisons

Other comparisons customers ask about that do not fit a merge queue matrix.

[

### Flaky test tools compared

Mergify Test Engine, Trunk Flaky Tests, Datadog Test Optimization and BuildPulse: how each one detects flaky tests, and why Mergify handles them inside the job, on the pull request and in the merge queue.

Read comparison →

](https://mergify.com/compare/flaky-test-tools)[

### Mergify vs Datadog CI Visibility

Datadog CI Visibility is a CI observability product, not a merge queue. Different category, but customers occasionally evaluate both. The comparison covers when each one fits.

Read comparison →

](https://mergify.com/compare/datadog-ci-visibility)

## Frequently asked questions

### Which merge queue is the best for a small team?

For teams of fewer than 10 engineers on a single repo, GitHub's native merge queue is the right starting point. It is free, ships with GitHub, and handles the basics. Once PR volume, monorepo complexity, or CI cost become problems, the other options become worth the budget. See [Mergify vs GitHub merge queue](https://mergify.com/compare/github-merge-queue).

### Mergify vs Graphite: how do they differ?

Graphite leads with stacked diffs and AI code review, and their merge queue requires teams to adopt the Graphite platform end-to-end (not just the queue). Mergify covers the merge queue independently, plus CI Insights (job health, auto-retry), and Test Engine (flaky detection, quarantine, PR-level prevention) in every plan. The Mergify queue lands GitHub stacked pull requests in order, reading stack membership from GitHub itself rather than from branch chaining. See the [Mergify vs Graphite](https://mergify.com/compare/graphite) comparison.

### Mergify vs Trunk: how do they differ?

Trunk's flaky test detection lives at the CI test layer. Mergify Test Engine integrates flaky handling with the merge queue itself, so the signal drives quarantine and smart auto-retry. On top of that, Mergify ships CI Insights for full job and runner observability (duration, failure rates, cost) that Trunk does not have. Mergify also covers merge governance (freezes, dependencies, scheduling) that Trunk does not. See the [Mergify vs Trunk](https://mergify.com/compare/trunk) comparison.

### Mergify vs Aviator: how do they differ?

Aviator is a capable merge queue at a lower starting price, but it sells the merge queue alone, with CI observability and merge governance as separate products. Mergify includes all of those in every plan. See the [Mergify vs Aviator](https://mergify.com/compare/aviator) comparison.

### Can I use more than one merge queue on the same repo?

Two different merge queue tools cannot own merging into the same branch (so you pick one tool per repo). Inside Mergify, though, parallel scope queues let you run multiple queues simultaneously on the same repo across independent parts of a monorepo, which is the common pattern for large monorepo deployments.

### What about Datadog CI Visibility?

Datadog CI Visibility is a CI observability product, not a merge queue, so it is not on this comparison. Customers sometimes evaluate both, see the dedicated [Mergify vs Datadog CI Visibility](https://mergify.com/compare/datadog-ci-visibility) page for that comparison.

## Teams that merge more and break main less.

[

### 2x merge throughput with 3‑hour CI runs

Read story →

Cerebras

350 engineers · AI Infrastructure

](https://mergify.com/customers/cerebras)

[

### Cut CI time and kept main green

Read story →

Apex Fintech Solutions

350 engineers · Financial Technology

](https://mergify.com/customers/apex)

[

### 2x faster merges across a massive monorepo

Read story →

Back Market

300 engineers · E-commerce

](https://mergify.com/customers/back-market)

[

### 100% green main, faster shipping

Read story →

PayFit

150 engineers · HR Tech

](https://mergify.com/customers/payfit)

## Move faster. Break less.

Mergify merges more than half a million pull requests a month without breaking main.

[Get started](https://dashboard.mergify.com/)[Talk to our team](https://mergify.com/discovery)
